Kia K900: To set cruise control speed
1.Move the lever up (to CRUISE), to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed.
- 20 mph (30 km/h) ~ 110 mph (180 km/h) : when there is no vehicle in front
- 0 mph (0 km/h) ~ 110 mph (180 km/h) : when there is a vehicle in front
3.Lever must be moved down (to SET-) prior to setting any desired speed. The SET indicator light, set speed and vehicle to vehicle distance on the LCD screen will illuminate.
4.Release the accelerator pedal. The desired speed will automatically be maintained.
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+), and hold it. Your vehicle set speed will increase
by 5 mph (10 km/h). Release the lever at the speed you want.
Move the lever ...
See also:
The LDWS does not operate when
The driver turns on the turn signal or the hazard warning flasher to change
lane.
Driving on the lane line.
✽ NOTICE
To change lane, operate the turn signal switch then change the l ...
Lane changing
A vehicle which moves into your lane from an adjacent lane cannot be recognized
by the sensor until it is in the sensor's detection range.
The sensor may not detect immediately when a ve ...
Operating door locks from outside the vehicle
Mechanical key
After removing the cover (1) ~ (2), turn the key toward the rear of the
vehicle to unlock and toward the front of the vehicle to lock (3), (4).
If you lock/unlock the driverâ ...
Categories
