Kia K900: Rear seat adjustment - for power seat
The rear seat can be adjusted by using the control switches located on the door.
WARNING
The power seat is operable with the Engine Start/Stop Button in OFF. Therefore, children should never be left unattended in the vehicle.
CAUTION
- The power seat is driven by electric motors. Stop operating once the adjustment is completed. Excessive operation may damage the electrical equipment.
- When in operation, the power seat consumes a large amount of electrical power. To prevent unnecessary battery drain, don’t adjust the power seat longer than necessary while the engine is not running.
- Do not operate two or more power seat control switches at the same time. Doing so may result in power seat motor or electrical component malfunction.
WARNING
Use extreme caution so that hands or other objects are not caught in the seat mechanisms while the seat is moving. Do not adjust the seat while wearing seat belts. Moving the seat cushion forward may cause strong pressure on the abdomen.
WARNING
Do not operate the rear power seat while the child seat is installed.
- Forward, backward and seatback angle (for power seat)
- Easy access switch (for power seat)
- Additional switches for adjusting the front passenger seat
- Lumbar support (for rear right and left passenger’s seat)
- Rear switches operating limitation
- Headrest (for rear seat)
- Armrest
- Carrying long / narrow cargo (for fixed seat, if equipped)
Installation
1.Recline the seatback (2) with the recliner control switch (1).
For manual type
2.Put the headrest poles (3) into the holes while pressing the release button
(4).
3.Recline the seatback (6) ...
Forward, backward and seatback angle (for power seat)
Push the control switch forward or backward to move the seat to the desired position.
Release the switch once the seat reaches the desired position. ...
See also:
The LDWS does not operate when
The driver turns on the turn signal or the hazard warning flasher to change
lane.
Driving on the lane line.
✽ NOTICE
To change lane, operate the turn signal switch then change the l ...
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
The air flow outlet port is converted as follows:
Face-Level (B, C, D, E, F, G)
Air flow is ...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lights when the driver turns
off the engine and opens the driver-si ...