Kia K900: To set cruise control speed
1.Move the lever up (to CRUISE), to turn the system on. The CRUISE indicator light will illuminate.
2.Accelerate to the desired speed, which must be more than 20 mph (30 km/h).
3.Lever must be moved down (to SET-) prior to setting any desired speed. The SET indicator light in the instrument cluster will illuminate.
Release the accelerator at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill.
Cruise control switch
CRUISE :
Turns cruise control system on or off.
CANCEL :
Cancels cruise control operation.
RES+:
Resumes or increases cruise control speed.
SET-:
Sets or decreases cruise control speed. ...
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+) and hold it. Your vehicle will accelerate. Release
the lever at the speed you want.
Move the lever up (to RES+) and release it ...
See also:
Battery recharging by vehicle
After a jump start from a good battery, run the engine for 20-30 minutes at idle
or driving the vehicle before it is shutoff. Vehicle may not restart if you shut
it off before the battery had chan ...
Power Door Latch
If a door isn’t closed completely but is closed to the first detent position,
the door will close automatically.
CAUTION
To reduce the risk of injury:
Before closing the door, check there ar ...
Front blind spot monitoring system
The Blind Spot Detection System is not a substitute for proper and safe lane
changing procedures. Always drive safely and use caution when changing lanes. The
Blind Spot Detection System may not ...