Kia K900: Instrument Cluster Control
Adjusting Instrument Cluster Illumination
The brightness of the instrument panel illumination can be adjusted by pressing the illumination control buttons (“+” or “-”) when the Engine Start/Stop Button is ON or the tale lights are turned on.
- If you hold the illumination control button ("+" or "-"), the brightness will be changed continuously.
- If the brightness reaches to the maximum or minimum level, an alarm will sound.
Instrument cluster
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. LCD display
6. Warning and indicator lights ...
LCD Display Control
The LCD display modes can be changed by using the control buttons on the steering
wheel.
(1) < , > : MODE button for changing modes.
(2) ,
: MOVE button for changing items
(3) OK : SEL ...
See also:
Detecting sensor
The sensors are located inside of the rear bumper.
Always keep the rear bumper clean for the system to work properly. ...
Good braking practices
Check to be sure the parking brake is not engaged and that the parking brake
indicator light is out before driving away.
Driving through water may get the brakes wet. They can also get wet whe ...
Operating conditions
The indicator on the switch will illuminate when the Blind Spot Detection System
(BSD) switch is pressed with the Engine Start/Stop Button ON.
If vehicle speed exceeds about 18.6 mph (30 km/h), t ...
Categories
