Kia K900: System warning
- If you try to drive off depressing the accelerator pedal with the EPB applied,
but doesn't release automatically, a warning will sound and a message will appear.
- If the driver's seat belt is not fastened and the engine hood in [D] gear
or trunk in [R] gear is opened, a warning will sound and a message will appear.
- If there is a problem with the vehicle, a warning may sound and a message
may appear.
If the above situation occurs, depress the brake pedal and release EPB by pressing
the EPB switch.
WARNING
- To prevent unintentional movement when stopped and leaving the vehicle,
do not use the shift lever in place of the parking brake. Set the parking brake
and make sure the shift lever is securely positioned in P (Park).
- Never allow anyone who is unfamiliar with the vehicle to touch the parking
brake. If the parking brake is released unintentionally, serious injury may
occur.
- All vehicles should always have the parking brake fully engaged when
parking to avoid inadvertent movement of the car which can injure occupants
or pedestrians.
CAUTION
- A click sound may be heard while operating or releasing the EPB, but
these conditions are normal and indicate that the EPB is functioning properly.
- When leaving your keys with a parking lot attendant or valet, make sure
to inform him/her how to operate the EPB.
- The EPB may malfunction if you drive with the EPB applied.
- When you automatically release EPB by depressing the accelerator pedal,
depress it slowly.
System warning
When the conversion from Auto Hold to EPB is not working properly a warning will
sound and a message will appear.
CAUTION
Depress the brake pedal when the above message appears for the Auto Hold and
EPB may not activate.
System warning
If the EPB is applied while Auto Hold is activated because of ESC (Electronic
Stability Control) signal, a warning will sound and a message will appear .
EPB malfunction indicator
This warning light illuminates if the engine start/stop button is changed to
the ON position and goes off in approximately 3 seconds if the system is operation
normally.
If the EPB malfunction indicator remains on, comes on while driving, or does
not come on when the engine start/stop button is changed to the ON position, this
indicates that the EPB may have malfunctioned.
If this occurs, have your vehicle checked by an authorized K900 Kia dealer as
soon as possible.
The EPB malfunction indicator may illuminate when the ESC indicator comes on
to indicate that the ESC is not working properly, but it does not indicate a malfunction
of the EPB.
CAUTION
- The EPB warning light may illuminate if the EPB switch operates abnormally.
Shut the engine off and turn it on again after a few minutes. The warning light
will go off and the EPB switch will operate normally. However, if the EPB warning
light is still on, have the system checked by an authorized K900 Kia dealer.
- If the parking brake warning light does not illuminate or blinks even
though the EPB switch was pulled up, the EPB is not applied.
- If the parking brake warning light blinks when the EPB warning light
is on, press the switch, then pull it up. Once more press it back to its original
position and pull it back up. If the EPB warning does not go off, have the system
checked by an authorized K900 Kia dealer.
Applying the parking brake
To apply the EPB (electric parking brake):
1.Depress the brake pedal.
2.Pull up the EPB switch.
Make sure the warning light comes on.
Also, the EPB is applied automat ...
If there is a problem with the brake pedal while driving, emergency braking is
possible by pulling up and holding the EPB switch. Braking is possible only while
you are holding the EPB switch.
WA ...
See also:
Low tire pressure position telltale
When the tire pressure monitoring system warning indicators are illuminated and
warning massage displayed on the cluster LCD display, one or more of your tires
is significantly under-inflated.
...
To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the
accelerator pedal.
Increased speed will not interfere with cruise control operation or change the
set speed.
To ret ...
Additional switches for adjusting the front passenger seat
The switch is located in the armrest of the rear seat.
To adjust the position of front passenger’s seat ;
Press the control switch forward (1) or rearward (2) to move the seat to the
desired pos ...