The driver's seat belt warning light and chime will activate to the following table when the ignition switch is in "ON" position.
*1Warning pattern repeats 11 times with an interval of 24 seconds. If the driver's seat belt is buckled, the light will stop within 6 seconds and chime will stop immediately.
*2 The light will stop within 6 seconds and chime will stop immediately.
To resume cruise control set speed
If any method other than the CRUISE lever was used to cancel cruising speed and
the system is still activated, the cruising speed will automatically resume when
you move the lever up/down (to RE ...
Engine coolant
The high-pressure cooling system has a reservoir filled with year-round antifreeze
coolant. The reservoir is filled at the factory.
Check the antifreeze protection and coolant level at least once a ...
Start/Run
To start the engine, depress the brake pedal and press the ENGINE START/STOP
button with the shift lever in the P (Park) or the N (Neutral) position. For your
safety, start the engine with the s ...