(1) Power Trunk Main Control button (or lever)
(2) Power Trunk Open button
(3) Power Trunk Close button
(4) Power Trunk Lock button
To open:
1. Make sure the shift lever is in P (Park).
2. Then do one of the following:
Press the smart key trunk unlock button for more than one second. Press the open button on the trunk. You need the smart Key in your possession, when all doors are locked.
Press the power trunk main control button (for type A). Pull the power trunk, main control lever (for type B).
To close:
Do one of the following:
Press the power trunk main control button until the power trunk is closed securely (for type A). Push the power trunk main control lever until the power trunk is closed securely (for type B).
Press the close button on the trunk. Press the lock button on the trunk while carrying the smart key and all the vehicle’s doors and trunk are closed. All doors and trunk will lock and arm the theft alarm system.
If you push a button or lever while the trunk is opening or closing, it could stop moving. Press any button to operate the power trunk again.
✽ NOTICE
The power trunk lock button will not work if you press the button when: Any door is open. The engine start/stop button is not in the OFF position. The smart key is in the vehicle.
WARNING
Never leave children or animals unattended in your vehicle. Children or animals might operate the power trunk that could result in injury to themselves or others, or damage to the vehicle.
WARNING
Always keep the trunk lid completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle and serious illness or death may result.
WARNING
Make sure there are no people or objects around the trunk before opening or closing the power trunk. Wait until the trunk is open fully and stopped before loading or unloading cargo from the vehicle.
CAUTION
✽ NOTICE
In cold and wet climates, trunk lock and trunk mechanisms may not work properly due to freezing conditions.
To resume cruising speed at more than approximately 20 mph (30 km/h)
If any method other than the CRUISE lever was used to cancel cruising speed and
the system is still activated, the most recent set speed will automatically resume
when you move the lever up (to ...
In the event of brake failure
If service brakes fail to operate while the vehicle is in motion, you can make
an emergency stop with the parking brake. The stopping distance, however, will be
much greater than normal.
WARNING
...
Start/Run
To start the engine, depress the brake pedal and press the ENGINE START/STOP
button with the shift lever in the P (Park) or the N (Neutral) position. For your
safety, start the engine with the s ...