Kia K900: Mechanical key operations
- Used to lock and unlock the glove box.
- Lock and unlock the doors when the vehicle or smart key battery is discharged.
Conventional smart key
To remove the mechanical key, press and hold the release button(1) and remove the mechanical key(2).
To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.
Card type smart key
Push and hold the release lever (1) and remove the mechanical key (2). Insert the mechanical key in to the key hole on the door.
To reinstall the mechanical key, push and hold the release lever (1) and put the key into the hole and push it until a click sound is heard.
Battery replacement
Conventional smart key
A battery should last for several years, but if the smart key is not working
properly, try replacing the battery with a new one. If you are unsure how to use
or replace the ...
Restrictions in Handling Keys
When leaving keys with parking lot and valet attendants, the following procedures
will ensure your vehicle’s trunk and glove box compartment can only be opened with
the mechanical key.
To lock: ...
See also:
Driving at night
Because night driving presents more hazards than driving in the daylight, here
are some important tips to remember:
Slow down and keep more distance between you and other vehicles, as it may
...
Non-operational conditions of parking assist system
Parking assist system may not operate normally when:
1.Moisture is frozen to the sensor. (It will operate normally when moisture melts.)
2.Sensor is covered with foreign matter, such as snow or wate ...
Electronic Stability Control (ESC) Indicator Light
This indicator light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
It illuminates for approximately 3 seconds and then goes off.
When there i ...