Kia K900: ESC operation off
ESC OFF state
This car has 2 kinds of ESC off states.
If the engine stops when ESC is off, ESC remains off. Upon restarting the engine, the ESC will automatically turn on again.
ESC off state 1
To cancel ESC operation, press the ESC OFF button (ESC OFF
) shortly (ESC OFF indicator light
(ESC OFF 
) illuminates).
At this state, the engine control function does not operate. It means the traction control function does not operate. Brake control function only operates.
ESC off state 2
To cancel ESC operation, press the ESC OFF button (ESC OFF
) for more than 3 seconds. ESC OFF
indicator light (ESC OFF 
) illuminates
and ESC OFF warning chime will sound.
At this state, the engine control function and brake control function do not operate. It means the car stability control function does not operate any more.
ESC operation
ESC ON condition
When the ignition is turned ON, ESC and ESC OFF indicator lights illuminate
for approximately 3 seconds, then ESC is turned on.
Press the ESC OFF button for at least half a ...
Indicator light
When the ignition switch is turned ON, the indicator light illuminates, then
goes off if ESC system is operating normally.
The ESC indicator light blinks whenever ESC is operating.
The ESC indic ...
See also:
Turn By Turn (TBT) Mode
This mode displays the state of the navigation. ...
Clock
Whenever the battery terminals or related fuses are disconnected, you must reset
the time.
You can set the clock by using the AVN (Audio or Navigation) For the details,
refer to the AVN manual. ...
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine is probably too hot. If this happens,
you should:
1.Pull off the road ...