For manual type
To raise the headrest
1.Pull it up to the desired position (1).
To lower the headrest
1.Push and hold the release button (2) on the headrest support.
2.Lower the headrest to the desired position (3).
For power type
To raise the headrest
1. Push the control switch up (1).
To lower the headrest
2. Push the control switch down (2).
Release the switch once the headrest reaches the desired position.
Seat belt warning (for driver’s seat)
The driver's seat belt warning light and chime will activate to the following
table when the ignition switch is in "ON" position.
*1Warning pattern repeats 11 times with an interv ...
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning
is reduced. Overfilling also has a negative impact on the air conditioning system.
Therefore, if abnormal operation is ...
Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front
and rear doors.
They are designed to help protect the heads of the front seat occupants and the
rear outboard sea ...