Kia K900: Mechanical key operations
- Used to lock and unlock the glove box.
- Lock and unlock the doors when the vehicle or smart key battery is discharged.
Conventional smart key
To remove the mechanical key, press and hold the release button(1) and remove the mechanical key(2).
To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.
Card type smart key
Push and hold the release lever (1) and remove the mechanical key (2). Insert the mechanical key in to the key hole on the door.
To reinstall the mechanical key, push and hold the release lever (1) and put the key into the hole and push it until a click sound is heard.
Battery replacement
Conventional smart key
A battery should last for several years, but if the smart key is not working
properly, try replacing the battery with a new one. If you are unsure how to use
or replace the ...
Restrictions in Handling Keys
When leaving keys with parking lot and valet attendants, the following procedures
will ensure your vehicle’s trunk and glove box compartment can only be opened with
the mechanical key.
To lock: ...
See also:
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly.
Allow adequate stopping distance because brake perfo ...
Checking the coolant level
WARNING
Removing radiator cap
Never attempt to remove the radiator cap while the engine is operating
or hot. Doing so might lead to cooling system and engine damage and could result
in se ...
Turn By Turn (TBT) Mode
This mode displays the state of the navigation. ...