Kia K900: High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back for low beams.
The high beam indicator will illuminate when the headlight high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.
WARNING
Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver’s vision.
To flash the headlights, pull the lever towards you. It will return to the normal (low beam) position when released. The headlight switch does not need to be on to use this flashing feature.
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF or DRL OFF position ...
Turn signals and lane change signals
The Engine Start/Stop Button must be ON position for the turn signals to function.
To turn on the turn signals, move the lever up or down (A). The green arrow indicators
on the instrument panel ...
See also:
Disarmed stage
The system will be disarmed when:
- The door unlock button is pressed.
- The button of the front outside door is pressed while carrying the smart key.
- The engine is started. (within 3 seconds)
A ...
Instant Fuel Economy (3)
This mode displays the instant fuel economy during the last few seconds when
the vehicle speed is more than 6.2 MPH (10 km/h).
Fuel economy range: 0 ~ 50 MPG or 0 ~ 20 L/100km ...
To resume cruise control set speed
If any method other than the CRUISE lever was used to cancel cruising speed and
the system is still activated, the cruising speed will automatically resume when
you move the lever up/down (to RE ...